Fan Coil Unit Manufacture - Enviro Tech Industrial Products Delhi India
Chilled Water Fan Coil Units
Our Chilled Water Fan Coil Units vary are offered in the range of 1.0 to 2.5 tons with DX chilled water or heating coils for cooling & heating purpose. The units can be either placed on the floor or suspended from the ceiling. The cooling coils are made of copper tubing and sine wave aluminum fins with vent valve for air removing. The motors for blowers have 3 speeds to work for comfort level. The casing is made out of G.I. sheet and powder coated as per the customers choice. The cooling and heating coils are made of copper tube and aluminum fan.
Following are the salient features of
the fan coil unit:
- Enhanced construction for long life
- Rust resistant body
- High efficiency and low noise
- Space saving due to slim construction
- Low energy consumption
- No leakage of water
Other Information
- Pay Mode Terms: T/T (Bank Transfer)
Fan Coil Unit Filter
Fan Coil Unit Filter are designed to meet the requirements of high efficiency filtration under high chemical exposure and high humidity conditions. These are available in 3 different variations namely: H.D.P.E (High Density Polythene)pleated/rod type Pleated Channel type and Rod-Frame type PH Filter. All the pre filters are made under strict quality control scanner for complete .
Construction: are made from high quality synthetic non-woven media supported by stitching HDPE media on both sides. Media is then stitched and housed inside a rod frame.
Other Information
- Pay Mode Terms: T/T (Bank Transfer)
Fan Coil Unit Motors
Available FCU { Fan Coil Unit } motors in different capacity
Other Information
- Pay Mode Terms: T/T (Bank Transfer)
Ceiling Concealed Fan Coil Unit / Ceiling Concealed FCU
We are among the noted names in the industry, manufacturing and exporting Ceiling Concealed Fan Coil Unit for our revered customers. The offered units are designed in strict compliance with the industry standards and are characterized by low height and compact design. Customers can avail these units in direct driven or belt driven, single or multi centrifugal fan and double skin or single skin options.
Specifications:
Capacity Range:
- 800 cfm to 10,000 cfm
Applications:
- Comfort Air-conditioning - For Shopping Malls, Multiplexes, and Small offices..
Features:
- Compact
- Low height with single /multi centrifugal fan
- Direct driven/ Belt driven options with 3 phases
- Units available in Double / Single skin
- Double skin units available with aluminum profile
- Direct Driven units with single-phase motors
Other Information
- Pay Mode Terms: T/T (Bank Transfer)
Fan Coil Unit
Backed by a team of skilled professionals our enterprise is able to offer a wide range of Fan Coil Unit that produces very less noise. Offered range is manufactured using finest quality raw material and advance technology under the strict industry laid norms. Our offered coil unit is available in different specifications and sizes as per the requirements of the clients. Apart from this, we deliver this coil unit within the promised time frame to our clients.
Features:
-
Hassle- free performance
-
Finely finished
-
Corrosion resistance
Specifications:
Fan coil units are available in two configurations:
-
horizontal type suitable for ceiling suspension
-
vertical type suitable for floor mounting
Casing:
-
Galvanised sheets of heavy gauge steel with suitable drain tray to avoid sweating
-
The fan coil unit are (double skin) painted with stove paint/ h. T. Paint, electro static paint as per customer requirements
Blowers:
-
the multi blade forward curved centrifugal type aluminium fan wheels statically and dynamically balanced are driven by extended shaft motor
Fan Motor:
-
3 speed permanent split capacitor type motor with extended manual speed selection
Drain Fan:
-
heavy gauge
-
Double skin insulated drain pan extend full width of coil collect condensate from chilled water coils valve and fitting with provision of drain nipple to avoid overflow
Cooling Coil:
-
3 row deep 3/8 o. D. Copper tubing aluminum fin construction provide maximum
Heat transfer:
-
The water inlet and outlet are provided with flare nut for connections to control valves.
Air Filter:
-
Filter is made of expanded aluminum mesh/ HDPE media/synthetic non-w oven media and is permanent cleanable type filter the air to a maximum deg.
Technical Specifications:
-
model no Enviro tech fan coil unit
-
ceiling suspended type unit
-
powder coating type unit
-
centrifugal blowers DWDI aluminum impeller with static & dynamically balanced
-
single phase motors
-
cooling coil copper pipes
-
g. I. Sheet
-
drain tray with insulation
-
Enviro tech industrial products fan coil unit model no – etipfcu
-
available size 1. 0 tr 1. 5 tr 2. 0 t 2. 5 tr 3. 0 tr 5. 0 tr
-
fan coil unit direct driven
-
fan coil unit v belt driven
-
fan coil unit horizontal arrangement
-
fan coil unit ceiling suspended
-
fan coil unit duct able ac
-
fan coil unit ac ducting system
Applications:
-
Showroom.
-
Shopping Mall
-
Restaurant & Bar
-
Hotels
-
Office
-
Call Center
-
Building
-
Clean Room
-
Fan Coil Unit
Other Information
- Pay Mode Terms: T/T (Bank Transfer)
Fan Coil Unit Horizontal Ceiling Suspended Exposed Type
Specifications:
Dimension of Horizontal Ceiling Suspended Exposed Type | |||||||
MODEL | A | B | C | D | E | F | G |
ETIP050 | 1000 | 560 | 300 | 160 | 660 | 200 | 660 |
ETIP075 | 1210 | 650 | 300 | 160 | 860 | 200 | 860 |
ETIP100 | 1335 | 670 | 360 | 180 | 940 | 205 | 940 |
Other Information
- Pay Mode Terms: T/T (Bank Transfer)
Fan Coil Unit Horizontal Ceiling Suspended Hideway Type
Specifications:
Dimension of Horizontal Type Unit | ||||||||||
MODEL | A | B | C | D | E | F | G | H | I | J |
ETIP050 | 970 | 510 | 718 | 250 | 673 | 165 | 235 | 290 | 350 | 222 |
ETIP075 | 1200 | 610 | 838 | 280 | 877 | 165 | 285 | 290 | 395 | 248 |
ETIP100 | 1295 | 630 | 950 | 280 | 953 | 216 | 285 | 340 | 385 | 274 |
ETIP125 | 1325 | 630 | 950 | 280 | 997 | 260 | 285 | 390 | 553 | 274 |
ETIP150 | 1525 | 780 | 1110 | 412 | 1150 | 260 | 310 | 390 | 510 | 310 |
Other Information
- Pay Mode Terms: T/T (Bank Transfer)
Fan Coil Unit Vertical High Wall Mounted Unit
Specifications:
Dimension of Vertical High Wall Mounted Unit |
|||||||||
MODEL | A | B | C | D | E | F | G | H | I |
ETIP050 | 250 | 200 | 480 | 140 | 950 | 100 | 720 | 160 | 720 |
ETIP075 | 270 | 220 | 570 | 180 | 1020 | 120 | 780 | 185 | 780 |
ETIP100 | 270 | 220 | 570 | 180 | 1020 | 120 | 780 | 185 | 780 |
Other Information
- Pay Mode Terms: T/T (Bank Transfer)
Fan Coil Unit Vertical Exposed Type Unit
Dimension of Exposed Type Unit |
|||
MODEL | A | B | C |
ETIP050 | 1120 | 565 | 270 |
ETIP075 | 1230 | 565 | 280 |
ETIP100 | 1300 | 610 | 290 |
ETIP125 | 1350 | 650 | 300 |
ETIP150 | 1460 | 720 | 350 |
Other Information
- Pay Mode Terms: T/T (Bank Transfer)
Fan Coil Unit Vertical Floor Mounted Concealed Unit
Specifications:
Dimension of Vertical concealed Type Unit | ||||
MODEL | A | B | C | D |
ETIP050 | 840 | 550 | 265 | 260 |
ETIP075 | 1020 | 550 | 265 | 260 |
ETIP100 | 1100 | 600 | 285 | 260 |
ETIP125 | 1150 | 715 | 295 | 260 |
ETIP150 | 1250 | 715 | 345 | 260 |
Other Information
- Pay Mode Terms: T/T (Bank Transfer)